D-GC88 FUEL DISPENSER

D-GC88 FUEL DISPENSER

Pump :Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :450kg

Dimension(L×W×H): 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 26

is provided for maintenance. Check floater. Disconnect upper cover, check ball floater and returned oil floater and find whether oil flow into floater. Ball floater is made of two brass bowls through welting each other. If welding line exists defect it is easy that oil flow into. It is suggested to change a floater or weld the broken. Putting repaired floater into water more than 80 degree, if found no foam at welding line the repaired one could continue to be used. Some manufacturers replace ball floater, returned oil buoy and exhausting valve seat with ball valve subassembly. Adopting Oil-resistant plastic substitute thin brass board to make returned oil floater. Suggesting change a new floater as found any abnormal transformation of floater. Inspect returned oil valve. There are two situations exhausting pipe leakage caused by the returned oil valve. One situation is that returned oil valve is cemented due to extensive oil. In this case it is suggested to clean valve and reassemble it. Another situation appears because the returned oil valve is stuck. Taking away burr or waste on leader and reassemble it reference to Diagram 2-13. 3.3 No delivery or inefficient discharge caused by vapor fuel dispenser separator Examine filter. A blocked filter not only affects fuel the suction capacity, but also generates abnormal noise. It is suggested to clean and reassemble fuel dispenser filter. Don’t use brush to clean metal net so as not to increase net hole and affect filter accuracy. Inspect check valve. If check valve is stuck fuel dispenser can’t discharge any oil. The method to solve the problem is to clean waste after disconnecting spring seat, spring and check valve, and reassemble it. Make sure that the movement of check valve is agile. Inspect the leakage between tank and fuel dispensers. The inspection is conducted with filter check. If no oil or oil level go down slowly in low pressures chamber, there must leakage in bottom valve or pipeline. If there is still leakage occurred fuel dispenser after solve above problem, carefully examine

IFSF　　 Dispenser application protocol it is very unlikely that a　　 proprietary pump protocol will support this feature.　　 Hence any W M algorithms will be implemented in the　　 PCD and not the pump. So this Data_Id will have to set by　　 the PCD to reflect the creation date of the W M software　　 it is utilising internally.　　 57 Bin8 R(1-9) M　　 W M_Security_Type　　 (39H) (0-255)　　 To allow the CD to specify the type of W M security　　 method used in the transaction data.　　 0 = no security type.　　 1 = security type as defined in the IFSF Bulletin:　　 Dispenser CRC Signature Generation.　　 PCD Comment:　　 As this Data_Id is a unique Data_Id to the IFSF　　 Dispenser application protocol it is very unlikely that a　　 proprietary pump protocol will support this feature.　　 Hence any W M algo fuel dispenser rithms will be implemented in the　　 PCD and not the pump. So this Data_Id will have to set by　　 the PCD to reflect the W M security fuel dispenser type it is utilising　　 internally.　　 58 bcd12 R(1-9) M　　 Protocol_Ver　　 (3AH)　　 To allow the CD to interrogate the version number of the　　 protocol being used by the dispenser. The Protocol_Ver　　 number format is 9999999999.99 .　　 PCD Comment:　　 This Data_Id should be set to the IFSF Dispenser　　 Application protocol version number being used by the　　 PCD to communic fuel dispenser

ainst. After receiving hundreds of complaints, the communications regulator is about to look into whether to remove the programmes from ITV1 and ITV2 by reclassifying them as adverts for phone lines. The Gambling Commission is examining whether they are in fact lotteries, which would mean a fifth of profits would have to go to charity. For now, ITV cannot resist the easy money. As Britain s television market has evolved and fragmented to offer hundreds of channels on several platforms, its share of the audience is shrinking and advertising revenues are plummeting. ITV Play, which airs “The Mint�and other phone-in quiz shows on a digital channel as well as on ITV1 and ITV2, has turned out to be surprisingly profitable. Telephone companies give ITV a big slice of the cash that comes in from viewers premium-rate phone calls. These cost 75p from a BT landline, more from a mobile phone. In the first half of the year, ITV Play brought in some £30m of revenues—a fraction of the sums it makes from advertising, but enough to excite the City. Channel 4, a government-owned outfit whose stated mission is to fulfil a range of worthy purposes with “public-service�programming, is also coining i fuel dispenser t from call-in quiz shows. Last year it started Quiz Call, a digital channel. Channel 4, too, worries about shrinking audiences. On the other hand, BSkyB, a TV co fuel dispenser mpany with no public-service duties, decided against offering call-in quiz shows last year because it thought them unfair to viewers. One of the reasons there has been such a fuss about the quiz shows is that they appeal to the poor. So far this year, according to a company that measures television audiences, more than half of the viewers for ITV Play belong to social category “E� meaning they are pensioners or casual workers. Some 40% are 65 or over and 70% are women. The audience for “The Mint�contains lots of young mothers, shift workers, students and older people who don t sleep well at night, sa fuel dispenser ys Stephen Leahy, chairman of