K-GA44Q FUEL DISPENSER

K-GA44Q FUEL DISPENSER

FlowMeter Type :Optional

Accuracy ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H) : 1540*690*2210(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

ystem. The valve core of overflow valve moves outward so that all pressured oil flood past the outlet of overflow valve and flow fuel dispenser into suction chamber, realizing oil circulation in pump. The hydraulic system pressure is adjusted through increasing or reducing spring pressure. The most fragile section in hydraulic system will be damaged as the pressure reaching a certain value without a overflow valve to control pressure. The spring pressure will be increased through to add the thickness of pre-pressure ring (20a). The pressure to open overflow valve and the delivery volume of fuel dispenser are also increased. Vice ver fuel dispenser sa, as the thickness is reduced. working principle of inner-cycloidal gear pump Inner-cycloidal gear pump consists of a pair of inner and outer gear joggled interactively. Inner gear is driver, called as inner rotor; outer gear is driven called as outer rotor. The figure of inner rotor is round arc curve, but the joint section of inner rotor figure and outer rotor curve is exterior cycloidal. Outer rotor exceeds one tooth than inner rotor. Sever sealed working cubage are formed between teeth of inner and outer rotor. Inner rotor brings outer rotor rotation anticlockwise. At tha fuel dispenser t time the cubage gradually increase, formed in suction chamber by the tooth top of inner rotor and gear vale of outer rotor. As pressured oil suck into discharge chamber the cubage formed by inner and outer gear is reducing, impelling oil out of pump. Continual suction and discharge result from the unceasing rotation of out gear driven by inner gear. 1-Vapor separator frame 2-Filter bracket 3-Filter 4-Filter bracket 5\6-O-ring 7-Gear group 8-Axis 9-Key 10-Cover 11-Oil seal 11a-Bolt 12-Screw 13-Elastic washer 14-Thread pipe 15-Joiter 16-Inlet filter 17-Stainer cover 18-Seal ring 19-Voverflow valve cover 20-Spring 20a-Preloading ring 21-Voverflow valve 22-Overflow valve 23-Filter with valve 23a-Spring 24-Exhaust pipe jointer 25-Screw 26-Outlet pipe 27-O-ring 28-Pump body Diagram 2-9: One kind of inner cycloida

eject　　 Forces the ATP task to move to the IDLE state and run the service　　 engineer s test program.　　U fuel dispenser NSOLICITED DATA　　 100 M　　 CHSATP_Status　　 This status message must be sent unsolicited without acknowledge by the　　 ATP task when ever a change has occurred in the CHSATP_State. This　　 status message includes (unsoliceted message formatting see chapter 1.5　　 page 8):　　 Data_Id = 1 CHSATP_State　　 101 fuel dispenser M　　 CHSATP_Progress　　 During this state the CHS will provide the sales processtill with unsolicited　　 with acknowledge messages CHSATP_ProgressEvent detailing the　　 progress of current processes occurring at the device (i.e. seeking　　 authorisation etc.) and where appropriate requesting any information from　　 the sales processtill (i.e. confirm voice authorisation has been obtained).　　 This status message includes (unsoliceted message fuel dispenser formatting see chapter　　 1.5 page 8):　　 Data_Id = 20 CHSATP_Error　　 Data_Id = 40 CHSATP_ProgressEvent　　 102 M　　 CHSATP_Print　　 The field CHSATP_PrintData will be sent unsolicited (without　　 acknowledge) by the ATP task when data needs to be printed. This status　　 message includes (unsoliceted message formatting see chapter 1.5 page 8):　　 Data_Id = 50 CHSATP_PrintData　　chs_100 STANDARD FORECOURT PROTOCOLJ. Carrier April 1998 - FINAL DRAFT 1.00　　 CARD HANDLING SERVER APPLICAT

e continued right to retire at 60 on full benefit—they have a justified grievance (see article). But compared with most private- fuel dispenser sector workers, who will probably have to work well past 65 for an uncertain reward, the strikers have no claim at all. When Mr Brown talks about the public sector—or the “public realm� as he prefers to call it when waxing philosophical—he appears to see it as the embodiment of fairness and decency. In a recent speech, he spoke lyrically about the “men and women who, as is the essence of the labour movement, chose solidarity in preference to selfishness; thus creating out of the idea o fuel dispenser f duty and responsibility the Britain of civic responsibility, civic society and the public realm.� Yet in reality both the pension rights of public-sector employees and, in some parts of the country, their wages too have overtaken those in the private sector. With its indiscriminate largesse, the government has succeeded in making even family doctors unpopular, as they pocket £150,000-a-year ($262,000) salaries while reducing the hours their surgeries are open to patients. The four out of five people who work in the private sector and are forced to pay with their taxes fo fuel dispenser r such generosity may struggle to share the chancellor s rose-tinted view of the public realm. To be fair to Mr Brown, many of the mistakes, especially the more egregious pay deals, have not been his or his alone. Nor is he indifferent to getting value for the money that has been poured into health, education and other services. But up to now, his instinct has been to prefer Treasury-imposed targets and conventional top-down efficiency reviews to the systemic reform and bottom-up innovation that might yield better results. Keep off the grass What is almost as disturbing is Mr Brown s attitude to any internal debate on his policies. This week, a couple of the prime minister s close allies, Alan Milburn and Stephen Byers, both former ministers, dared to draw attention to the incentive-sapping