U104-A 3-phase Connection

U104-A 3-phase Connection

This type of meter is used to fuel dispensers for measurement of pressurized oil.

Materials:

Body: Aluminum (Spray-Painted)

Package:

Net Weight:

1.7kg/case of 1

Gross Weight: 1.9kg/case of 1

Dimension: 36x15x15cm/case of 1

tion pin 15-O-ring Diagram 2-27: Structure of general nozzle 1-Spout 2-Nut 3-Hex nut 4-Gasket 5-Valve washer 6-Gasket 7-Washer 8-O-ring 9-Assistant valve 10-Spring 11-Guiding bar 12-Cap 13-Seal 14-Spring 15-Bolt 16-O-ring 17-Lockwasher 18-Spring seat 19-Gasket 20-Valve body 21-Nozzle body 22-O-ring 23-Gland nut 24-Ejection pin 25-Supporting gasket 26-Pin axis 27-Suppor plate 28-Switch handle 29-Pin axis 30-Copper sleeve 31-Valve seat Diagram 2-28: Exploded drawing of general nozzle 1.2 Structure and function of key components Main valve unit Illustrated in Diagram 2-29, main valve consists of valve body, gasket, locking washer, spring seat, which is used to switch on or off the delivery pipe pf nozzle. 1-Valve body 2-Gas fuel dispenser ket 3-Lockwahser 4-Screw 5-S fuel dispenser pring seat 6- fuel dispenser O-ring Diagram 2-29: Main valve unit Adjusting used for change the clearance between switcher and top level, which should be kept in 0.3~ 0.5mm. Locking washer is to prevent bolt loose. Vice valve Vice valve will be closed as main valve switch off, showed in Diagram 2-30. As for fuel dispenser with presetting function, main valve don’t close after presetting filling, vice valve is closed to ensure accuracy and field clean. 1-Spring 2-Valve body 3-Guiding bar 4-Gasket 5-Valve washer Diagram 2-30: Vice valve Top level and switch handle. Used for open or close of main valve, changing openness so as to adjusting outlet flow rate. Locking nut To pressure O-ring in case of leakage Working principal As fuel dispenser start work, lift switch handle and open main valve, oil filled with chamber of main and side valve, oil discharge out of nozzle spout through pressured oil opening side valve. Usage and maintenance Nozzle is made of aluminum, which is carefully taken up and down, in case of being damaged. Regularly add greasy oil to nozzle to facilitate operation; regularly inspect O-ring, replacing damaged one. There is a regulative device between top level and switch handle, which is used to adjust clearance. Disconnect p

Approved by　　 Issue　　 141101 01 Creation based on: Christian　　 �?Working document NT1088R5 MPA LEMAIRE　　 V5.2: preliminary technical　　 specifications of the ATM-Monetics　　 link　　 �?the INGENICO-TOKHEIM meeting　　 held on 9 November 2001　　 (75 pages)　　 02 �?Definition of service messages and　　 221101 C.L.　　 related data　　 �?Details on lists　　 �?Addition o fuel dispenser f Miscellaneous chapter　　 fuel dispenser fuel dispenser �?Addition of paragraph 8.4　　 �?B0 application:　　 �?Message 2 : addition of Acceptor　　 parameters ; deletion of　　 Miscellaneous parameters　　 �?Message 3 : deletion of Validity　　 start date　　 �?Message 9 : deletion of Validity　　 start date　　 �?EMV application: addition of Acceptor　　 parameters ;　　 �?MAG card application: addition of　　 Acceptor parameters ;　　 (81 pages)　　 03 �?B0 application:　　 231101 C.L.　　 �?messages 2 and 3 : addition of　　 Cash or currency parameters and　　 related data　　 �?MAG card application:　　 �?for message 2 : addition of D5032

There will be no welcome mat for Bulgarian and Romanian workers EPA Turned away WHEN the European Union expanded to the east in May 2004, Britain was the only large country to open its labour market to workers from the eight new member states. Together with Ireland and Sweden, it gave up the right to impose restrictions lasting up to seven years. On October 24th, that open-door policy was slammed shut for Bulgaria and Romania, which are due to join the EU in January 2007. John Reid, the home secretary, announced a battery of controls, which have been designed to keep out all but a trickle of migrant work fuel dispenser ers from the union s two new fuel dispenser members. fuel dispenser The policy reversal had been foreshadowed in August, when ministers started to drop the heaviest of hints that Bulgaria and Romania would be treated differently. It followed an embarrassingly wrong prediction the government had published about the likely migration from Poland and the other seven countries that joined in 2004. This suggested that the net inflow of workers would be only 13,000 a year until the end of the decade. However, figures published in August showed that 427,000 migrants from eastern Europe had registered for work between May 2004 and June 2006. Allowing for the self- employed took the true figure closer to 600,000 according to Tony McNulty, a Home Office minister. The government s new controls are designed mainly to prevent low-skilled Romanians and Bulgarians from working in Britain. Only 19,750 will be allowed to work in just two industries, agriculture and food processing (and citizens from non-EU countries will no longer be allowed to work in those sectors). A handful of highly-skilled workers will be welcome; and skilled migrants can be employed provided that they get work permits. Students will be allowed to work part-time. The open-door policy may have ended but it is an open question how effective