HONGYANG GROUP Belgium Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Belgium Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

U405 Reconnectable Breakaway

fuel-dispenser

U405 Reconnectable Breakaway

The U405 is a dry reconnectable breakaway for the conventional dispensing market. It is designed to be installed on fuel dispensing hoses, and will separate when subjected to a designated pull force. The dual valves seat automatically stopping the flow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. When reconnecting the separated halves, the U405 seals tightly on an O-ring before the poppet stems engage to open the valve. For proper operation on high-hanging hoses, the U405 must always be installed With a straightening hose with a minimum length of 9". For low hose applications, the U405 should be installed down stream of the retractor cable.

WARNING

We advice you replace a new U405 breakaway when the pull-force is lower than 180 lbs after many reconnections

Materials:

Body: die cast zinc

Main Seals: Viton

Main Spring: stainless steel

Guide and poppet: POM

Protective Sleeve: Pa66

Features:

Pull force- the U405 will break away with a pull force of 250 lbs 5%, the U405 will break away with a pull force of 300 lbs 5%.

Unique double-poppet design-features low pressure drop.

Flow rate: 0-60L/Min

Working pressure: 0.18Mpa

Coupling halves- protected by proven plastic sleeves

Easily reconnected- just "push and twist" until you hear the audible click, signifying the unit has been correctly reconnected. Reconnection force approximately 15 lbs.

Line shock - U405 is able to absorb the effects of normal line shock through the unique design of the disconnecting features.

May be reconnected under wet or dry hose conditions.

100% Factory Tested.

Package:

Product ID Net Weight Cross Weight

U405-A 26.5kg/case of 50

30kg/case of 50

35x35x26 cm3 /case of 50

U405-B 26.5kg/case of 50 30kg/case of 50

35x35x26 cm3 /case of 50

U405-C 26.5kg/case of 50 30kg/case of 50

35x35x26 cm3 /case of 50

U405-D 26.5kg/case of 50 30kg/case of 50

35x35x26 cm3 /case of 50

products links

links

technical archives

    lled to fasten card in case of preventing pull out. Keyboard is commonly used by reader and fuel dispenser. Filling operation command firstly is received by reader, and transmitted into fuel dispenser through port I. Printer is optional. So, most IC card fuel dispenser isn’t mounted it. RF antenna is preset for adopting radio frequency card. By structure, there are no much differences between fuel dispenser’s IC card and the POS of commercial IC card. IC card fuel dispenser has many functions such as card read-write operation, data processing, safety attestation, data memory and management, keyboard operation, graphic display, exchange data with main board and with fuel management system, power supply management, etc. in order to integrate all above operations, some manufacturers adopt several single-chip. 5.2 Card-linkage technology Control type of fuel dispenser Fuel dispenser is divided into filling controlled type and filing uncontrolled type in terms of filling fuel dispenser process. True mechanical fuel dispenser and electronic fuel dispenser with electronic count function don’t have function of controlling filling. Computerized fuel dispenser basically is designed to be controllable type with two kinds of modes ---- collective control and disperse control. Collective control type is adopted manageable device to control fuel dispenser though command. Disperse control type, according to identifying user’s information, realizes operation of fuel dispenser by the device installed on fuel dispenser that identify IC fuel dispenser card or other label carrier. According to different control type and employ mode, there are several operation methods: Indoor / outdoor filling Indoor filling: need authorized command sent by manageable device to open pump after holding up nozzle. Outdoor filling: needn’t authorized command sent by manageable device to open pump after holding up nozzle. Auto / non-auto authorized filling Auto authorized filling: manageable device automatically, after holding nozzle, transmit fuel dispenser

technical specification

    Prod_Nb FM_ID   61H 00000001-99999999 11H-18H   Product Product Number Fuelling   Data (bcd8 format) Mode   Identifier   (1-8)   M_ID   81H-90H   Meter   Identifier   (1-16)   SW_DAT   A1H   Software   and   Data   Down-   load  June 2005 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.21   DISPENSER APPLICATION   Page: 57  3.2 Common Field Formats  IFSF application Field Formats are given in IFSF Engineering Bulletin No. 11. The following  statement is made for field fuel dispenser s of type Volume.   Field Format Description   VOLUME bin8 + bcd8 Volume value (used for fuelling transaction data).   Please note that the unit of volume is implied. I.E.   if the dispenser is installed in a country where the   unit of volume is Litres then the volume will be in   fuel dispenser Litres. Alternatively if the dispenser is installed in   a country where the unit of volume is Gallons   then all volume will be in Gallons.  3.3 Calculator Data  This data allows the CD to configure the calculator in the dispenser.  The access to the calculator database is done by the fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    us implying that America s struggle against al-Qaeda is indeed a war. Mr Bush s only response so far has been to say that he will work with Congress to make the changes necessary “to give people their day in court� while promising that the ruling would not “cause killers to be put out on the street� There are absolutely no plans to move or shut down the camp. More s the pity. © 2006 . About sponsorship Florida prisons Trouble in Tallahassee Jul 6th 2006 | TAMPA From The Economist print edition A shootout at a federal prison reveals a rotten penal system AT 7.30am on June 21st, federal agents showed up at the Federal Correctional Institution in Tallahassee, in Florida. They had come to arrest six prison guards on charges of having sex with female inmates in exchange for contraband. What followed was worthy of a Jimmy Cagney film. Ralph Hill, one of the guards who was to be arrested, fuel dispenser began shooting at the agents. In the crossfire Hill was killed, as was William Sentner, one of the agents. The gun battle was so fast and furious that it was unclear how Reuters many bullets were fired, or who killed whom. A team of FBI crime- scene agents was sent immediately from Washington to Tallahassee, and is still investigating. Three of the five guards remain in custody. As Governor Jeb Bush admitted, rather ruefully, Florida does not need trouble in its federal prisons. It has plenty of prob fuel dispenser lems with its own Department of Corrections. Florida prisons are a little like remote feudal villages, where wardens and guards are the lords and the prisoners serfs. Once the prisons get the money they want from the state legislature—and in Florida it is seldom denied—they are mostly left alone to go about their business. What that business sometimes consists of was revealed by the death of Martin Lee Anderson, a 14-year-old black who was sent to a rural “boot camp� fuel dispenser